Electrical Specification:

Sr.No	Parameters	Specification
1	Rated Voltage	250 VAC ; 24 V DC
2	Rated Current	6-10 Amp
3	Rated Opertaion Current	AC (50 to 60Hz)		DC
		Ue V	Ie/AC 15 (utilization category)	Ue V	Ie/DC 13(utilization category)
		250	6	24	1.5
4	Insulation Resistance	100MΩ above(at 500VDC)
5	Withstand Voltage /HV	Current-carrying and non-current-carrying metal parts, Between terminal and earthing : 1500VAC, 50/60HZ
6	Terminal Torque	0.8 Nm (Minimum)
7	Life:	Electrical: 1000000 cycles ( 1 Million) (Push Button & Contacts)*
		Mechanical : 1000000 cycles ( 1 million)*
8	Connection	Screw type terminal

Envorimental Conditions:

1	Ambient Temperature	-10~+65°C
2	Humidity	95% RH (65°C)
3	Operating Temperature	-20°C to 65°C
4	Storage Temperature	-30°C to 70

Material:

Base / Cover – Tough, Impact resistant & fire retardant Plastic.

Gasket – Rubber with excellent resistant for UV exposure, Ozone & Weathering.

Screws – Half threaded Self Tapping Screws (salt spray of 168-hour test) with ASTN standard

Approvals:

Degree of Protection: IP65 / IP20 for Elements / Contact Blocks (As per IEC 60529 Standards). RoHS compliant.

Installation:

1. Unscrew and remove the black cover.
2. Unscrew the NC and NO contact block/Elements.
3. Insert the cable through hose and passes through cable clamp.
4. Strip the cable length suitable for wiring the switches(crimp with suitable terminal ).
5. Tape the striped part of cable.
6. Make wiring and screwing the NO, NC Contact block with 0.8 Nm Torque.
7. Tighten the cable clamp on the cable.
8. Screwing the enclosure, by skilled operator, check rubber gasket placed neatly to guarantee protection against water and dust.